华飞全自动口罩机产品简介（中英文版）

全自动连线组合机是将一台口罩本体制造机与两台口罩耳带熔接机相连接，当口罩本体做成后由传输带输送至口罩耳带熔接机进行耳带部分的熔接以完成一个完整的耳带口罩，仅需一名操作员即可操作整条生产线。

The automatic wiring combination machine connects a mask body manufacturing machine with two mask ear belt welding machines. When the mask body is made, it is transported by the transmission belt to the mask ear belt welding machine to complete a complete ear belt mask. The whole production line can be operated by only one operator.

设备名称：XLKZJ-100 型全自动连线组合口罩机

Equipment name: XLKZJ-100 automatic wiring combination mask machine

1.产品：平面耳带式口罩

Product: Flat ear-belt mask

2.产量：100Pcs/Min

Productivity: 100Pcs/Min

3.客户环境条件：温度 10-40℃,湿度不结露

Customer environmental conditions: temperature: 10-40 ℃, humidity: no condensation

4.客户电压要求：单相 220V，50/60HZ

Customer voltage requirements: single-phase 220V, 50 / 60Hz

备注说明：

◆项目方案设备，如客户电压及频率有特殊要求时，需重新根据电压及频率要求进行重新报价。

◆Project proposed equipment, if the customer voltage and frequency have special 

◆requirements, it needs to be re-quoted according to the voltage and frequency requirements.

项目方案为根据客户项目工艺提供的标准设备配置，如有个别调整，或

◆客户自备需进行沟通说明。

◆The project proposal is the standard equipment configuration provided according to the customer's project process, if there is any individual adjustment, or it is prepared by the customer, communication is required.

◆项目方案为根据客户项目工艺提供的标准设备配置，如有个别调整，或

◆客户自备需进行沟通说明。

◆The project proposal is the standard equipment configuration provided according to the customer's project process, if there is any individual adjustment, or it is prepared by the customer, communication is required.

Knowledge about the mask：

The medical use of the mask has nothing to do with the machine. As long

as the mask is sterilized, the mask produced by our machine can be used as a surgical mask.

    Common medical masks: mainly composed of three layers of non-woven fabrics. The inner layer is an ordinary non-woven fabric, and the outer layer is a waterproof non-woven fabric, which is mainly used to isolate the liquid ejected 

by patients; the inter filter layer is made of polypropylene melt-blown non-woven fabric after electret treatment; after the final production, it is sterilized by ethylene oxide and stored for 7 days, and then shipped away in sealed packaging.

Picture of the finished disposable mask (standard type)

Automatic taping machine 2pcs         Sheet processing machine 1p

整体外观示例

                                  Overall appearance example

设备技术规格表：

机器尺寸

Equipment siz 6250mm（长）x 4500mm（宽）x 1650mm（高）

6250mm（length）x 4500mm（width）x 1650mm（height）

驱动方式

Drive mode 伺服马达及步进马达

Servo motor and stepping moto

电控方式

Electric control mode 电脑 PLC 程序控制

Computer PLC program control

控制面板

Control panel 人机界面（触摸屏）及按钮

Human-computer interface (touch screen) and button

额定电源

Rated Power 单相 220V，50/60HZ

Single phase  220V, 50/60HZ

气 压

Air pressure 0.5～0.6Mpa 

适用工艺

Applicable process 双层、三层、四层医用及普通口罩

Double-layer, three-layer, four-layer medical and ordinary masks

产品规格

Product specification 标准型：175 x 95mm 

Standard type:175 x 95mm,

产 能

Productivity 约 80～100 片/分钟

About 80～100pc/min

合 格 率

Percent of pass 99%以上 

Above 99%

设备重量

Equipment weight 1200KG

生产一次性平面口罩所需材料

Materials for the production of disposable face masks

材料名称

Material 材料克重 克/平方

Material gram weight

gram/square

  材料宽度MM

Material width MM 每片切长MM

Length per piece MM 单片克重G

Single sheet gram weight G 备注

Note

SS无纺布深色-外层用

SS non-woven fabric dark color-for outer layer 25 200 175 0.875 绿色，蓝色，黑色等Green, blue, black, etc.

白色熔喷无纺布-过滤层

White meltblown non-woven fabric-filter layer 22 180 175 0.693 过滤指数90%/95%/99%

Filter index 90%,/95%/99%

SS无纺布浅色或者白色-内层用

SS non-woven fabric light color or white-for inner layer 25 210 175 0.919

鼻梁条

Nose bridge stri 100 铝制或者铁质，建议用铝条

Aluminum or iron, aluminum strip is recommended

松紧耳带

Elastic ear belt 300 单150MM*2边=300MM

Single 150MM * 2 sides = 300MM

  >>设备配置清单(Equipment configuration list)

序列号No. 产品名称

Product name 产品图片

Product picture 机器优势

Advantages of the machine

1 切割胶辊

Cutting rubber roll 我们用铬钢盖住橡胶辊两边，所以橡胶长时间使用后不会从侧面断裂

We cover both sides of the rubber roller with chrome steel, so the rubber will not break from the side after long use

2 牵引辊

Carry-over pinch roll 我们使用硅橡胶材料而不是丁腈材料。硅橡胶材料具有良好的耐磨性，不会开裂。

We use silicone rubber materials instead of nitrile materials. Silicone rubber material has good abrasion resistance and will not crack.

3 PLC触摸屏

PLC touch screen 我们使用三菱集团品牌PLC触摸屏

We use Mitsubishi brand PLC touch screen

4 口罩鼻梁带张力控制

Nose bridge strip tension control 我们使用口罩鼻梁条带张力控制器。这种装置可以避免鼻带长度不同

We use a mask nose bridge strip tension controller. This device can avoid different lengths of nose strips

5 鼻梁条送入

Nose bridge strip feeding 我们使用鼻梁条直接送入装置，它可以保证在加工过程中，鼻梁条可以更笔直的插入，以成品的口罩是平整的和美观的

We use the nose bridge strip to feed directly into the device, which can ensure that the nose bridge strip can be inserted more straight in the processing, so that the finished mask is flat and beautiful.

6 无纺布原料传感器

Non-woven material sensor 我们使用无纺布原料传感器，一旦原材料消耗完，机器将自动停止

We use non-woven material sensor, once the raw material is consumed, the machine will stop automatically.

7 原材料张力控制器1

Raw material tension controller 1 我们使用原材料张力控制器来避免材料堵塞

We use raw material tension controller to avoid material clogging

8 原材料张力控制器2

Raw material tension controller 2 我们的机器配备了两种制动方式。一个皮带是紧迫，另一个是螺丝固定。你可以选择一个或同时使用根据你所需要的

Our machine is equipped with two braking methods. One belt is tight and the other is screwed. You can choose one or both according to your needs

9 原材料纠偏装置

Raw material correction device 我们使用原材料纠偏设备，做材料调整

We use raw material correction equipment to make material adjusted

10 电控箱

Electric cabinet 我们使用的正泰电器

We use CHINT electrics

11 变频器

Frequency converter 我们使用台达集团的变频器

We use Delta converter

12 静电消除器

Electrostatic eliminator

在我们机器里有一个静电消除。消除无纺布口罩面静电

There is an electrostatic eliminator in our machine. Eliminate static electricity on non-woven face mask

13 马达

Motor 我们的齿轮马达是新型的，不需要加油。

Our gear motor is new and do not require refueling.

14 风扇Fan 我们将风扇安装在超声波喇叭附近，降低喇叭温度，延长超声波寿命。

We install the fan near the ultrasonic horn to reduce the temperature of the horn and extend the life of the ultrasonic.

15 超声波焊接系统

Ultrasonic welding system 在口罩本体机中有两套超声波系统

There are two ultrasonic systems in the mask body machine

    连接器部分设置清单Connector configuration list

序列号No. 产品名称Product name 产品图片Product picture 机器优势

Advantages of the machine

1 连接器电脑

Connector computer 连接器电脑

Connector computer

2 电控箱

Electric control box 我们使用三菱电器

We use Mitsubishi Electric

3 两个连接皮带电机

Two connected belt motors 两个连接皮带电机使两个连接皮带运行。

Two connected belt motors operate the two connected belts.

4 连接气管

Connected air tube 机器有三部分连接气管，一是耳环连接部分，另外两部分是耳环机。

The machine has three parts connected to the air tube, one is the earring connection part, and the other two parts are ear belt machines.

5 本体口罩输送装置

Body mask conveying device 我们使用输送装置将本体口罩输送到两台口罩点焊机上。

We use a conveying device to transport the body mask to two mask spot welders.

耳带点焊部分配置单

Configuration table of ear belt spot welding part

序列号No. 产品名称Product name 产品图片Product picture 机器优势

Advantages of the machine

1 伺服电机

Servo motor 我们使用伺服电机（台湾三角），使机器 工作稳定

We use servo motor (Taiwan Triangle) to make the machine work stably

2 耳带点焊机电脑

Ear belt spot welder machine 两套耳带点焊机电脑

Two ear belt spot welder computers

3 光电眼

Photocell eye 光电眼我们使AIRTAC 和ROKO牌子

We use AIRTAC and ROKO photocell eye

4 电磁阀

Magnetic valve 电磁阀是AIRTAC品牌。

We used AIRTAC magnetic valve.

5 触摸屏

Touch screen 触摸屏

Touch screen

6 PLC 我们PLC的牌子：三菱

Our PLC brand: Mitsubishi

7 伺服驱动器

Servo driver 我们使用台达公司的伺服驱动器

We use Delta servo driver

8 风扇Fan 我们将风扇安装在超声波喇叭附近，降低喇叭温度，延长超声波寿命。

We install the fan near the ultrasonic horn to reduce the temperature of the horn and extend the life of the ultrasonic.

9 声波系统

Ultrasonic system 一台点焊机器上，2套超声波系统，我们自己制造声波，质量好，稳定。

There are two sets of ultrasonic systems on a spot welding machine,  we make sound waves by ourselves, which are of good quality and stable.

10 口罩成品推送装置

Face mask pushing device 我们机器上面使用气缸式口罩品推送装置

We use a cylinder mask pushing device on our machine.

11 耳带穿料装置

Ear belt pull-through device 我们安装便捷的耳带穿料装置

We install the convenient ear belt pull-through device

12 独立输送带

Independent conveyor belt 我们安装口罩片材输送带

We install the mask sheet material conveyor belt

13 连接气管

Connected air tube 机器有三部分连接气管，一是耳环连接部分，另外两部分耳环机

The machine has three parts connected to the air tube, one is the earring connection part, and the other two parts are ear belt machines

14 耳带裁断装置

Ear belt cutting device 耳带裁断装置

Ear belt cutting device

注：1）以方案设备清单为初步方案，根据客户配置需求以最终沟通确认商业文件及合同为准。以上设备预计生产周期为 30 天，实际周期视情况而定，以合同签订为准。

Note: 1) The above proposed equipment list is the preliminary plan, and the final communication and confirmation of commercial documents and contracts shall prevail according to the customer's configuration needs. The production cycle of the above equipment is expected to be 30 days, and the actual cycle depends on the situation, subject to the signing of the contract.